Ion Selective Electrode

The Ion Selective Electrode (ISE) flow cell is designed to accommodate various ion selective combination electrodes. One example is the sympHony™ Fluoride Ion Selective Combination Electrode produced by VWR. More generally, the standard ISE flow cell will accommodate any combination electrode with a 1/2 inch diameter.

Simply plug your electrodes into the flow cell ports, set up an electrical gradient and then take absorbance measurements as normal

• Part #79010 | Plexiglass Flow Cell for Combination Ion Selective Electrode

• Part #79011 | Ultem Flow Cell for Combination Ion Selective Electrode

The small internal volume of this flow cell (200 microliters), allows ISE electrodes to be coupled with both flow injection and sequential injection analyzers.

ISE-based assays include ammonia, fluoride, chloride, bromide, nitrate, calcium, and potassium.

ISE flow cells are now used for performing quality control on 3M filters.

Product
Type: Flow cell for ion-selective electrode

Body material: Plexiglas or Ultem

Required ISE type: 0.5 in diameter flat-bottom electrode

Fluidics
Wetted materials: Body material (Plexiglas or Ultem), PTFE

Chamber volume: 85 µL

Fluidic port type: Flat-bottom ¼-28

Environmental requirements
Operating temp: +5 °C to +100 °C

Dimensions

Height: 2.5 in (6.4 cm)

Width: 1.5 in (3.8 cm)

Depth: 0.75 in (1.9 cm)

Weight: 2.0 oz (57 g)