FIAlab Instruments, Inc.
14450 NE 29th Place STE 113
Bellevue, WA 98007 USA
Voice: 425-376-0450
Fax: 425-376-0451
fialab@flowinjection.com
|
|
|
New
Announcements
Brochures:
New FIAlab Brochure can now be downloaded here
(PDF format).
Conferences:
SIA 2008 Conference June 2-4 Pharmaceutical
Faculty Charles University, in HRADEC KRALOVE, Czech
Republic.
The 15th International Conference on Flow
Injection Analysis (ICFIA) and The 25th Anniversary Meeting of the Japanese
Association of Flow Injection Analysis (JAFIA) will be held in Nagoya,
Japan, September 28 - October 3, 2008.
Products:
 |
FIAlab-2600
- The FIAlab-2600 offers the same dual channel FIA capabilities as two
connected FIAlab-2500s except it's built into a single enclosure with a dual
sample loop injection valve and a six channel peristaltic pump. The
advantages include cost savings, bench space, speed (sample has less
distance to travel to fill both sample loops), and simplicity.
Click here
for additional information
|
 |
The SMA-USP Flowcell
- The new SMA Ultra-Short Path Flowcell allows absorbance measurements
through an optical path length of only ~100 microns to ~2000 microns (please
specify).
The SMA-USP flowcell is made
from Spectrosil® Quartz and
is ideal for measuring UV/VIS/NIR (170 to 2700
nm) absorbance of optically dense fluids. Eliminates or minimizes the need
for pre-dilutions during online monitoring. Wetting surfaces are
Fused Silica and Teflon. Custom materials and designs are available.
Connects to fiber optics with SMA terminations.
Click here for
additional information
|
 |
The FIAlab-4000 Sequential Injection system, built into
a NEMA 4X waterproof/chemical resistant enclosure with
an embedded computer and touch screen monitor, is
ideally suited for online applications. The electrical
and software interfaces can be built to customer
specifications, including; out of tolerance alarms,
real-time dosing capabilities, and over the internet
monitoring.
Click here for additional information |
 |
The
SIChrom™ liquid chromatography system
is the first commercial LC instrument based on the
concept of sequential injection and programmable flow.
Although HPLC is a workhorse in many laboratories,
systems typically consist of large bench-top devices,
with high power consumption requirements, and lengthy
auxiliary operations prior to and after each separation
run. By integrating several evolving technologies, the
SIChrom system has been designed to allow HPLC analyses
at accelerated rates and conducted at much lower
pressures (<900 PSI). This at a lower instrument cost
and size, and without sacrificing performance.
Click here for additional information |
 |
High throughput
microAFFINITY CHROMATOGRAPHY in “lab-on-valve” (TM) system.
Production of Monoclonal Antibodies and quality
control of IgG’s is carried out in real time on Protein A, or Protein G
Sepharose 6B microcolumn, shown here adjacent to a fiber optic flowcell
integrated within “lab-on-valve” module. Separation and assay is
completed within 120 seconds, with detection limit of 6ng mouse IgG, monitored
at 280nm.
Click
here for additional information
(PDF format)
|
 |
LED
based lamps are available between
247 nm and 945 nm.
Multiple LEDs can be combined to achieve a
multifunctional broad based light source. Typical combinations
include:
LEDs are often superior to other light sources
for their relative low cost, long life, and stable output. They are
ideal for online applications.
Click here for additional information |
|
|
Please email or phone FIAlab Instruments
for additional product information.
Email:
fialab@flowinjection.com,
Voice: 425-376-0450 or 1-800-963-1101,
Fax: 425-376-0451
|
|