Please visit our new  Beta Website.

Misc. Components

Replacement Syringes
Cadmium Column for Nitrate Assays
Flow Thru  Heater (Waterbath)
A/D - D/A Modules for Data Collection and Pump Control
 

Syringes for FIAlab Pumps	For  Previous Models of FIAlab-3000, FIAlab-3500, and CSP3000 (Left syringe in photo) 7250XL0-0.50ml  Glass barrel syringe  $90.00 7250XL0-1.0ml  Glass barrel syringe  $90.00 7250XL0-2.5ml   Glass barrel syringe  $95.00 7250XL0-5.0ml  Glass barrel syringe  $110.00 7250XL0-10.0ml  Glass barrel syringe  $135.00 For new model FIAlab-3500,  and CSP6000 (Center syringe in photo) 7250XX0-0.50ml  Glass barrel syringe  $90.00 7250XX0-1.0ml  Glass barrel syringe  $90.00 7250XX0-2.5ml   Glass barrel syringe $95.00 7250XX0-5.0ml  Glass barrel syringe  $110.00 7250XX0-10.0ml  Glass barrel syringe $135.00 7250XX0-25.0ml  Glass barrel syringe $175.00 For MicroSIA, FIAlab-3200, and MicroCSP3000 (Right syringe in photo) 7250XP0-0.050ml  Glass barrel syringe  $75.00 7250XP0-0.25ml  Glass barrel syringe  $75.00 7250XP0-0.50ml  Glass barrel syringe  $75.00 7250XP0-1.0ml  Glass barrel syringe $85.00 7250XP0-2.5ml   Glass barrel syringe $90.00 7250XP0-5.0ml  Glass barrel syringe  $110.00
Cadmium Column for Nitrate Determination	CC120 - Prepacked Cadmium Column for reduction of Nitrate to Nitrite.  Used for the standard FIA Nitrate assay.  $150 each.
Flow Thru Heater for FIA \	FTCOIL - Flow through heater required for elevated temperature assays such as Phosphate. Temperature control from ambient up to 45 C. Accuracy is +/- 0.5 C. Coil is made from Teflon tubing 0.03 ID, total coil volume is 700 microliters (other sizes available).   This devise is designed to be integrated into the FIAlab system.   Note:  The FTCOIL is ideal for most heating FIA assay requirements, however for lower level ammonia concentrations  (less than ~10 ppm), it is recommended that a heated water bath approach is used instead.   Price $550.00. FTH20 - Thermostatically Heated Waterbath, ideal for heating coil to 80 C.  Recommended for Ammonia and other higher temperature flow thru requirements.  Approximately 12"x12"x8".   Price $550.00.
A/D - D/A Modules	The LJ-U12 allows easy USB port control of up to two Alitea peristaltic pumps simultaneously and independently. It includes 8 screw terminals for analog input signals whiche can be configured individually as 8 single-ended channels, 4 differential channels, or combinations in between.   The LJ-U12 includes 2 screw terminals for analog output signals (AO0 & AO1). Each analog output can be set to a voltage between 0 and the supply voltage (+5 volts nominal) with 10-bits of resolution.  Price is $175 each.
	The LS-3500 Control Module allows easy serial port (RS-232) ASCII control of up to two Alitea peristaltic pumps simultaneously and independently.  All the above Alitea pumps have manual ON/OFF, CW/CCW, and speed controls on their top or front panels.   Alitea pumps can also be remotely computer controlled by TTL lines for pump direction and digital to analog (DAC) for speed control.  The LS-3500 module includes two DACs (0-5 VDC), eight TTL outputs, and two ADC (0-5 VDC) for feedback measurements if desired.  Also, each LS-3500 contains two contact closures for powering additional moderate power consumption devices (< 1 Amp at 24 VDC).   The simple ASCII command structure allows one to easily control these pumps through Visual Basic, VC++, Delphi, and any other platform that can communicate ASCII strings through a serial port.  The LS-3500 package includes a serial port cable and example Visual Basic software showing  the typical command protocol.    Price is $375 each.