The fiber optic FIAlab-Z Cell for absorbance measurements is designed to work with two special FIA-P200-UV or  FIA-P400-UV optical fibers with stainless steel terminations.  The flow cell has an adjustable path length (0 - 10 mm), and is available in PEEK, high grade stainless steel or Plexiglas. 

The FIAlab-Z Cell is designed to accommodate common optical measurements in the UV to near IR. It's design minimizes bubble entrapment, which can be problematic in flow injection and sequential injection measurements.  The flowcell can be used for measuring absorbance from 170-2000 nm, however wavelengths shorter than 260 nm require solarization resistant fiber optic cables (please inquire for additional information).
 

Each cell order includes Upchurch fittings and tubing.

FIAlab-Z Cell is now offered in transparent polyetherimide (Ultem) for improved chemical resistance. Here is a partial list of common chemicals compatible with polyetherimide:
 
Acetic Acid, Acetone Alconox Acetone, Alconox , Carbon Tetrachloride, Cellosolve, Chromic Acid, Citric Acid, Clorox, Cyclohexane, Cyclohexylamine, Ethanol, Ethyl Acetate, Ethyl Ether, Formic Acid, Gasoline, Hexane, Hydrochloric Acid, Isopropanol,  Kerosene, Lestoll 1, Methanol, Methylethyl Ketone (MEK), Naphtha, Nitric Acid, Phenol, Phosphoric Acid, Potassium Carbonate, Potassium Hydroxide, Propylene Glycol, Skydrol, Sodium Hydroxide, Sulfuric Acid, Tetrachloroethylene, Tin Chloride, Toulene, Trichloroethane (1,1,2-), Triethylphosphate, Xylene, Zinc Chloride.