FIAlab Instruments
 Leaders in Flow Injection Technology


Please visit our new  Beta Website.

   SMA-Z Cell – The Flowcell for Stop Flow and Continuous Flow  Measurements


The SMA-Z Standard and
Micro-Volume Flowcells have been designed for absorbance measurements where the monitored wavelengths are longer than 210 nm.  The flowcells are available in 2.5, 5, 10, 20, 50 and 100-mm optical path lengths, with additional sizes available with special orders.  Available materials include chemically inert Teflon, PEEK, Ultem, Steel and Plexiglas.   The 10 mm SMA-Z standard Flowcell has a total internal volume of approximately 60 microlitersThe Micro-Volume 10 mm version has an internal volume of approximately 8 microliters.

 

These flowcells utilize UV-grade fused silica windows, a hard, non-corrosive, chemically resistant material that also has a high UV through IR transmittance (210 nm through 2000 nm).  The windows are held in place by chemically resistant seals, pressure mounted with steel SMA connectors (connectors do not contact the fluids).   The windows are removable for cleaning or replacement with another material of different optical bandpass properties.   The flowcell can be used with backpressures up to 800 PSI. 

 

Each order includes one flowcell, two optical windows, two steel SMA connectors, two chemically resistant Upchurch tubing connectors, ten feet of Teflon tubing, six chemically resistant seals.  Two SMA terminated fiber optic cables are required (P600-20 fibers are recommended).  Order fibers separately.    The detector of choice is the USB4000 spectrometer.

 

for optical paths less than 2.5 mm please see our USP flowcells.

SMA-Z flowcell  is now available in polyetherimide (Ultem) for improved chemical resistance.   Here is a partial list of common chemicals compatible with polyetherimide:  Acetic Acid, Acetone Alconox Acetone, Alconox , Carbon Tetrachloride, Cellosolve, Chromic Acid, Citric Acid, Clorox, Cyclohexane, Cyclohexylamine, Ethanol, Ethyl Acetate, Ethyl Ether, Formic Acid, Gasoline, Hexane, Hydrochloric Acid, Isopropanol,  Kerosene, Lestoll 1, Methanol, Methylethyl Ketone (MEK), Naphtha, Nitric Acid, Phenol, Phosphoric Acid, Potassium Carbonate, Potassium Hydroxide, Propylene Glycol, Skydrol, Sodium Hydroxide, Sulfuric Acid, Tetrachloroethylene, Tin Chloride, Toulene, Trichloroethane (1,1,2-), Triethylphosphate, Xylene, Zinc Chloride.

SMA-Z-100 flowcell has an optical path of 100 mm.  As with our other flowcells, it is available in PEEK, Ultem, Teflon, Plexiglas, and Stainless Steel.  Other materials are available upon special orders.

The Micro-Volume SMA-Z flowcell is similar to the SMA-Z flowcell in principle, however it's built with a significantly smaller internal volume.  The SMA-Z-Microvol 10 mm optical path flowcell has a total internal volume of less than 8 microliters.   Compare this to ~60 microliters for the standard SMA-Z-10 flowcell

Custom sizes and materials are also available, please contact FIAlab for additional information.

 

 

 

10 mm Optical Path SMA-Z Cell made in Plexiglas

 

10 mm Optical Path SMA-Z Cell made in Ultem

 

10 mm Optical Path SMA-Z-mvol Cell made in PEEK

Standard Volume SMA-Z Flow Cells

Part ID

Description

Price

SMA-Z-100 Cell

100 mm optical path FIAlab SMA-Z Cell with Fused Silica Windows (Specify Ultem, Plexiglas, Steel, Teflon or PEEK)

$729.00

SMA-Z-50 Cell

50 mm optical path FIAlab SMA-Z Cell with Fused Silica Windows (Specify Ultem, Plexiglas, Steel, Teflon or PEEK)

$629.00

SMA-Z-20 Cell

20 mm optical path FIAlab SMA-Z Cell with Fused Silica Windows (Specify Ultem, Plexiglas, Steel, Teflon or PEEK)

$529.00

SMA-Z-10 Cell

(most common)

10 mm optical path FIAlab SMA-Z Cell with Fused Silica Windows (Specify Ultem, Plexiglas, Steel, Teflon or PEEK)

$529.00

SMA-Z-5 Cell

5 mm optical path FIAlab SMA-Z Cell with Fused Silica Windows (Specify Ultem, Plexiglas, Steel, Teflon or PEEK)

$529.00

SMA-Z-2.5 Cell

2.5 mm optical path FIAlab SMA-Z Cell with Fused Silica Windows (Specify Ultem, Plexiglas, Steel, Teflon or PEEK)

$529.00

 

Micro-Volume SMA-Z Flow Cells

(note: Micro-Volume flowcells 20 mm and longer utilize a removable PEEK tube inside optical path for decreased volume).

Part ID

Description

Price

SMA-Z-100-mvol

 

100 mm optical path FIAlab SMA-Z-mvol Cell with Fused Silica Windows (Specify Ultem, Plexiglas or PEEK).  Less than 25 microliter internal volume.    Note: utilizes a removable PEEK tube inside optical path for decreased volume.

$729.00

SMA-Z-50-mvol

 

50 mm optical path FIAlab SMA-Z-mvol Cell with Fused Silica Windows (Specify Ultem, Plexiglas or PEEK) Less than 12 microliter internal volume.     Note: utilizes  a removable PEEK tube inside optical path for decreased volume.

$629.00

SMA-Z-20-mvol

 

20 mm optical path FIAlab SMA-Z-mvol Cell with Fused Silica Windows (Specify Ultem, Plexiglas, Steel, Teflon or PEEK) Less than 9 microliter internal volume.   Note: utilizes  a removable PEEK tube inside optical path for decreased volume.

$529.00

SMA-Z-10-mvol

 

10 mm optical path FIAlab SMA-Z-mvol Cell with Fused Silica Windows (Specify Ultem, Plexiglas, Steel, Teflon or PEEK).  Less than 8 microliter internal volume.  

$529.00

SMA-Z-5-mvol

 

5 mm optical path FIAlab SMA-Z-mvol Cell with Fused Silica Windows (Specify Ultem, Plexiglas, Steel, Teflon or PEEK).  Less than 5 microliter internal volume.  

$529.00

SMA-Z-2.5-mvol

 

2.5 mm optical path FIAlab SMA-Z-mvol Cell with Fused Silica Windows (Specify Ultem, Plexiglas, Steel, Teflon or PEEK).  Less than 3 microliter internal volume.  

$529.00

 

Additional Components

Part ID

Description

Price

SMA-WIN

Windows replacement kit - includes two UV/VIS replacement windows and six Teflon seals.

$45.00 

SMA-Z-TC

Temperature control module (ambient to 60 C).  Compatible with SMA-Z cells made from Stainless Steel (not included).

$750.00 

P600-20

600 micron diameter, 20 inches long, SMA terminated on both ends.   Two typically required. 

$149.00 (each)

USB4000

USB4000 Spectrometer with either 200-850 nm grating or 350 to 1000 nm optical grating.

 

Misc. Lamps

UV and Visible light sources

 

 

 
Please email or phone FIAlab Instruments for additional product information.
Email:
fialab@flowinjection.com, Voice: 425-376-0450 or 1-800-963-1101,  Fax: 425-376-0451

Home  Online Catalog  Applications  New Products                                       
FIA Principles 
FIA Database Company Profile Info Request     

Please visit our new  Beta Website.