AIM3200 with typical sample rack

configuration

AIM3200 with FIAlab-2500 System

The AIM3200 is  the ideal autosampler for the user with a medium size assay requirement (up to 180 sample vials), who demands quality workmanship, ease of use design, and the robustness required for the laboratory environment.

FLEXIBILITY   Through software, the user can have anywhere between 1 and 180 sample tubes, of various volumes, and with any combination of calibration check standards. The probe has access to any standard or sample at any time facilitating the re-analyses, re-standardization or auto dilution.  Off the shelf sample test tube racks are available in five sizes. These range from 90 position x 13mm diameter, to 21 x 30mm diameter. Sample tube heights can vary from 10mm to 200mm. It is also easy to configure the system to use any other "third party" rack configuration, provided they can fit on the AIM3200 mat.  Sample tubes in a wide variety of diameters and heights, our sample racks or yours, optional number of standards tubes, it all adds up to give you the flexibility you require.  The AIM3200 includes a fixed wash tube, where the probe can be cleaned between each sample vial access.

The AIM3200 is also ideal for use with 96 well plates, where up to four can be accommodated simultaneously.

The AIM3200 is easily connected to FIAlab instruments and controlled with the fully-integrated FIAlab for Windows  software, or controlled as a stand alone instrument by plugging into a computer's serial port.   Can also be easily controlled with simple ASCII commands through, e.g., Labview or Visual Basic.